How to fix PS4 error codes SU-30746-0, SU-42118-6

The Playstation is no stranger to error codes. All devices tend to have problems with their software or hardware from time to time, and an error message shows how your device tells you it needs to be fixed. The error code you see helps you determine the cause and correct it.

PS4 error codes SU-30746-0, SU-42118-6

The Playstation displays all kinds of error codes and they are usually software related. PS4 error codes SU-30746-0 and SU-42118-6, however, are not software problems. In most cases, these are hardware issues your PlayStation is experiencing. The fix may be simple or it may require purchasing new hardware to replace the current hardware on your PS4.

Reboot from safe mode and update the firmware

Errors SU-30746-0, SU-42118-6 only offer a way to reject the message. Once rejected, your PS4 will not boot. To start it and update the firmware, you need to go through the safe mode.

Download the firmware update

You need to download the firmware update to a USB stick. PS4 updates can be downloaded directly from Playstation official website here.

1. Download the firmware update.
2. Copy it to a USB pendrive.
3. Turn off the PS4 and wait a few minutes.
4. Press and hold the power button.
5. Release the power button when hear the second beep.
6. Connect the controller via USB when required.
7. Once the controller is connected, select Update System Software.
8. Select Update from USB storage device.
9. Allow update to install and restart the console.

Initialize the Playstation

Initializing the PlayStation will erase all content on it. You’re basically formatting the hard drive.

1. Turn it console off.
2. Press and hold the power button button until hear two beeps.
3. Connect the controller via USB when required.
4. Select Initialize PS4.
5. Restart the PS4.

Hardware problems

If the above two methods do not resolve SU-30746-0, SU-42118-6 errors, you may have a hardware problem. Have the console brought in for a checkup.

• Make sure the hard drive is connected properly and that no cables / wires are loose.
• Run diagnostics on the hard drive. It may be faulty and needs to be replaced.
• Have the rest of the equipment checked as well.

Conclusion

SU-30746-0, SU-42118-6 errors appear when an update is installed incorrectly or fails halfway, for example, the console power is disconnected for the update. It can also happen when the hard drive has become loose or crashed. Unfortunately, if the bug is caused by hardware problems, you don’t have much of a choice but to replace it. You can connect the hard drive to a computer and try to save your games or have it done by a professional, but hard drive recovery is not a good idea.